PLEASE NOTE: we cannot match colours to the factory brand plastic.
Have your race nuber and name printed on number plate decals customized for your selected bike! Choose background colour and we will change the colour of the race number according to the set regulations. For the front number plate.
The decals are printed by us at 24MX with the highest quality modern printing technology. If you follow our simple mounting instructions, these decals will sit firmly on your plastics!
Specify your start number and the name you want on your plates, then choose a background colour and trim colour.
- Sleek and easy to mount
- High-quality graphics that will not crack, change colour nor fall off.
NOTE!
The size of the numbers will be adjusted to fit the number of digits you have entered.
All names are printed in capital letters no matter how you register the name with us, ie, "Andersson" is printed "ANDERSSON".
All the templates we use are from standard OEM plastics
Mounting:
1. First clean the plastic with A9 Pre-Decal cleaner. NOTE! Also new plastic needs to be cleaned.
2. Heat the plastic by using a heat gun or hair dryer (only heat the edges of the decal).
3. Align the decal before you mount it. Attach it with masking tape, then remove some of the film slowly.
4. Fit the decal without touching the adhesive.
5. Begin to attach the decal starting from one corner, rubbing out all the air bubbles before they get too far from the edge.
6. Rub the entire decal with pressure, especially the edges, with a cloth so that the decal glue sticks firmly to the plastic.
*Custom decals are non-returnable.
Have your race nuber and name printed on number plate decals customized for your selected bike! Choose background colour and we will change the colour of the race number according to the set regulations. For the front number plate.
The decals are printed by us at 24MX with the highest quality modern printing technology. If you follow our simple mounting instructions, these decals will sit firmly on your plastics!
Specify your start number and the name you want on your plates, then choose a background colour and trim colour.
- Sleek and easy to mount
- High-quality graphics that will not crack, change colour nor fall off.
NOTE!
The size of the numbers will be adjusted to fit the number of digits you have entered.
All names are printed in capital letters no matter how you register the name with us, ie, "Andersson" is printed "ANDERSSON".
All the templates we use are from standard OEM plastics
Mounting:
1. First clean the plastic with A9 Pre-Decal cleaner. NOTE! Also new plastic needs to be cleaned.
2. Heat the plastic by using a heat gun or hair dryer (only heat the edges of the decal).
3. Align the decal before you mount it. Attach it with masking tape, then remove some of the film slowly.
4. Fit the decal without touching the adhesive.
5. Begin to attach the decal starting from one corner, rubbing out all the air bubbles before they get too far from the edge.
6. Rub the entire decal with pressure, especially the edges, with a cloth so that the decal glue sticks firmly to the plastic.
*Custom decals are non-returnable.